เครื่องเลเซอร์ diode pump 50W,75W,100W120W,150W laser marking ,laser marker

           เครื่องเลเซอร์ diode pump 50W,75W,100W120W,150W laser marking ,laser marker     Semiconductor laser marking machine uses a semiconductor laser diode array as the pump source, side-pumped Nd: YAG crystal excitation to produce a large number of flip particle cavity inner diameter of sound and light switch modulation a 1064nm giant pulse laser through an optical beam expander,laser is incident in the high-speed scanning oscillation driven straight FQ lens, through focused on the surface of the workpiece to be carved, the control system to command the movement of the laser beam required track by computing paths. Workpiece laser absorption, instantly lead to thousands of degrees of heat, thus Chemical piece surface oxidation or cold, leave permanent traces of light candle. Permanent graphics, text, markers can be inscribed in a variety of metallic and non-metallic surfaces, a cheap laser marking machine. Particularly suitable for small and medium enterprises chosen for the first time.       Major components:    Laser module: the level of import semiconductor laser diode (LD) array, a total of three horizontal arrays, single horizontal array composed by three LD 9 LD sheet, a horizontal array of 120 ° placed uniformly pumped. The adoption Φ3X65mm low-doped with Nd: YAG crystal rods (0.6at%), the lensing effect is small, high optical quality of the laser mode.    Scanning galvanometer: capacitive sensors, temperature drift and small, good repeatability. The 24-layer media subdural mirror, laser induced damage threshold is high.    Sound and light system: the production of the military system, microchannel cooling technology and good maintainability, the power of sound and light sound and light switch original equipment, the match is good, RF power attenuation long life cycle.   Technical parameters:    Laser pump source: semiconductor laser diode,   Laser power: <50W   Pump power: 360W   Cavity: parallel cavity   M ²: ≤4   Inscribe range: 110X110mm   Single carved Depth: ≤0.2mm   Inscribe speed: ≤7000mm / s   Minimum line width: 0.05mm   Minimum character: 0.5mm   บริษัทเลท็อปเลเซอร์จำกัด                                                                   44/14 ซอยเสรีไทย43  ถนนเสรีไทยเเขวงคลองกุ่มเขตบึงกุ่ม กรุงเทพฯ10240                                                                  มือถือ08 7099 3204 โทรศัพท์02 173 2311 อีเมล์ [email protected]  http://www.latoplaserthailand.com